Demios Predator, 15mm scale

Death has arrived!

Predator tank commander motto

It’s a quick diversion back into slightly unusual territory this week with a 15mm scale Demios Predator! This cool little model was printed as a gift by a good friend who owns a 3D resin printer. He also included some 15mm MkVI Space Marines and several other vehicles, including a 15mm Land Raider that I shared a few weeks ago.

Models at 15mm scale sit somewhere in between the 6mm scale of Epic miniatures and the 28mm scale of Warhammer 40,000. They’re small enough that they don’t take super long to paint, but large enough to tackle some interesting details. I’m using this cool gift as an opportunity to paint-up a small 15mm scale Horus Heresy Imperial Fists army. Below you can see comparison shots of the Predator next to 15mm infantry, and my trusty 28mm Guardsman ‘Sergeant Scale’.

This particular model was very high-up the painting priority order. For me, the Deimos Predator Destructor is one of the most iconic Space Marine tanks. In fact I think the very original 1980s plastic Predator was the first vehicle I ever encountered on the 40K tabletop!

Painting & Modelling

The 15mm Horus Heresy project is quite light on LEDs – if you’ll excuse the pun – compared to most of my other armies. But many of the vehicles are just too tempting not to wire up! As you can see from the above left image, the Predator autocannon barrel came out of the printer slightly ‘droopy’, so I decided to replace it with plastic rod. This also made it easier to drill the holes for the muzzle flare wires.

The Predator autocannon has a 3V Yellow 0805 SMD Chip LED (available from Small Scale Lights) at the muzzle. The LED is in series with its supplied 100Ω resistor. The circuit is supplied by a single 3V CR2032 coin cell battery and switch in the 50mm base. The muzzle flare effect around the LED is made from acrylic gel. I have a full, detailed explanation for how this whole process is done in my Simple LED Muzzle Flare Tutorial.

If you’re interested in my yellow paint receipe, you can find it in my previous post on the 15mm scale Land Raider.

As mentioned in my previous post on 15mm Horus Heresy, my plan is to use these models to play a few games with my regular gaming buddy Apologist who is building up an Emperor’s Children force. If you’d like to see how that’s going, then search his blog for 15mm Horus Heresy.

That’s it for this week, I hope you’re all finding this slightly unusual project interesting! I’m sure there will be some more posts about 15mm Horus Heresy again in the future. As ever, thanks for reading, and please don’t forget you can also follow my work on Twitter and Instagram.

Iron Duke, 15mm Scale Land Raider

The Land Raider is to other vehicles as the Astartes are to baseline humans.

Rogal Dorn, ‘A Treatise on Tanks’

Here’s something a little different – a 15mm scale Land Raider! This cool little model was printed as a gift by a good friend who owns a 3D resin printer. He also threw in some 15mm MkVI Space Marines and a few other bits and pieces to go with it. Models at 15mm scale sit somewhere in between the 6mm scale of Epic miniatures and the 28mm scale of Warhammer 40,000. They’re small enough that they don’t take super long to paint, but large enough to tackle some interesting details.

Painting & Modelling

Like so many of my other projects, initially I said “no LEDs”. But in the end I couldn’t resist putting a few in the Land Raider to make it seem as though the lascannons were firing. This was quite fiddly in terms of drilling, and as you can see in the WIP picture above I ended-up replacing the lascannon barrels with plastic tubes to make drilling the wire holes easier. Each lascannon has a 3V Red Ultra Nano SMD Chip LED (available from Small Scale Lights) at the aperture. The LEDs are in series with their supplied 100Ω resistor and then in parallel with each other. The whole circuit is supplied by a single 3V CR2032 coin cell battery and switch in the base.

The muzzle flare effects around the LEDs – simulating scattered laser light on the dusty battlefield – are made from acrylic gel. I have an explanation for how this is done in my Simple LED Muzzle Flare Tutorial.

The banner is an addition from my bits box, which I think may have come from an old Black Templar accessory sprue. The miniature is mounted on a 65mm base.

15mm scale Land Raider next to Warhammer 40K model ‘Sergeant Scale

I decided this Land Raider would essentially be a 15mm scale version of my classic 30K Land Raider ‘Iron Duke’. To paint the yellow, I fell back on my tried-and-tested recipe:

  • Corax white undercoat
  • Averland sunset base
  • Cassandora yellow shade in recesses
  • Yriel yellow (two thin coats)
  • Flash Gitz yellow edge highlight
  • Dorn yellow final edge highlight

Although this gives a nice bright yellow, it is quite time consuming, especially with the multiple applications of Yriel yellow. In hindsight I wish I’d invested in the new Imperial Fists contrast paint and given that a go instead as I imagine that would have been much quicker. Ah well!

So now I have this model, what am I going to do with it? Well my good friend Apologist also recieved some of these 15mm miniatures, and decided to paint them as Emperor’s Children so we could have a cool Horus Heresy themed game with them! You can read the battle report on his blog.

That’s it for this week, I hope you’ve enjoyed this slightly unusual project! I have some more 15mm models to finish, so I’m sure we’ll see some more of this project again in the future. As ever, thanks for reading, and please don’t forget you can also follow my work on Twitter and Instagram.