Today we’re looking at the first model that I’ve assembled and painted from the 10th Edition Warhammer 40,000 ‘Leviathan’ box – the Screamer Killer!

Hive Fleet Cerberus

My personal Tyranid swarm, Hive Fleet Cerberus, has been plaguing the galaxy for decades. In fact, they’re the only army I own that has – in some form or another – consistently seen the tabletop in every single edition of Warhammer 40,000. They took part in the global Ichar IV campaign back in the 1990s, so it has always been my ‘headcanon’ that Hive Fleet Cerberus was a splinter of Hive Fleet Kraken, skulking off to terrorise the Eastern Fringe in the aftermath of that epic conflict.

This army has soldiered on with some of the original Tyranid models for many years now (as shown below). These were among the first xenos models I ever purchased, and they will always hold a special place in my nostalgic gamer’s heart. For the last couple of new Warhammer 40,00 edition release boxes, I’ve sold the non-Marine models, but the arrival of Leviathan convinced me to not only keep them, but begin the long-overdue revamp of my Tyranid army. As the classic Screamer Killer was always one of my favourites, I decided this is where I should start the project.

Modelling

The most prominent feature of my Leviathan Screamer Killer is the LED bioplasma effect. This was achieved using the techniques described in my Simple LED Muzzle Flare tutorial, only with a blue 0805 chip LED instead of the yellow one listed in the tutorial. Additionally, the acrylic gel was given a blue glaze instead of the yellow.

These days I like to pick a limited colour palette of LEDs for army projects, just so the finished force does not look like a bunch of Christmas decorations with a huge mish-mash of different colours and lights. For Hive Fleet Cerberus I’ve settled on blue for energy weapons and psychic powers. I’m not sure what other colours I’ll use yet, but I’ll decide that as the need arises.

Painting

It’s often said that it’s best to start a new army paint scheme with the rank and file models, and not the leaders or large centrepieces, but as mentioned above I just couldn’t resist starting with the Screamer Killer. When it came to picking the colours for this revamp project I wanted to stick fairly close to the original scheme, so that meant red for flesh and bone for carapace. After some thought on what colour bioweapons should be, and considering both green and a beige ‘flesh’ colour, I eventually settled on blue. This forms a triadic colour harmony with the red and the yellowish tint of the bone. As an aside, I find this free Colour Wheel website a useful reference for choosing complementary colours schemes for painting projects.

You can see some examples below of classic Tyranids from Games Workshop publications painted in a red, yellow, and blue scheme. This colour combination definitely has a pedigree!

I decided to paint the Screamer Killer’s face blue for a number of reasons. Firstly, it was traditionally painted a different colour to the rest of the flesh and carapace on the classic model, so I felt that should be the case here as well. Secondly, as mentioned above, I’d settled on blue for bioweapons, and for this Tyranid, their face is the weapon! I added the purple mottling to the top of its head to provide some visual interest for what is otherwise a large, flat area.

I also made the sinews on the arms blue, as you may have noticed. This was because they felt distinct from the surrounding flesh, and in need of picking out in another colour. Again, as the claws are weapons, the blue seemed appropriate. Also, it adds some visual interest to what is otherwise a very large area of solid red when the model is viewed directly from the front.

When I list my painting recipes on this blog, I’m not only recording them for those of you who are interested in using them, but also as a reminder for myself! Below are the paint recipes for Hive Fleet Cerberus, and I’m sure I’ll be referring to this post frequently as the project progresses. All paints listed are from the Citadel range and are applied over an undercoat of Citadel Wraithbone spray.

• Red Flesh
• Contrast Blood Angels Red
• Wild Rider Red highlight
• Troll Slayer orange dot highlight on sharp points

• Bone Armour
• Contrast Skeleton Horde
• Screaming Skull highlight
• Skull White dot highlight on sharp points

• Blue Bioweapons
• Contrast Talassar Blue
• Lothern Blue highlight
• Blue Horror dot highlight on sharp points

• Black Claws
• Contrast Black Templar
• Eshin Grey highlight
• Dawnstone dot highlight on sharp points

• Purple Mottling
• Naggaroth Night irregular dot
• Genestealer Purple layer inside dot

• Yellow Eyes
• Averland Sunset base coat
• Agrax Earthshade shade
• Yriel Yellow layer
• Abaddon Black pupils

• Urban Base
• Mechanicus Standard Grey base coat on rocks
• Warplock Bronze base coat on metal debris
• Contrast Skeleton Horde on skulls
• Nuln Oil shade all over
• Dawnstone drybrush on rocks
• Administratum Grey drybrush on rocks
• White Scar drybrush on rocks
• Retributor Armour highlight on metal debris
• Screaming Skull highlight on skulls
• Skull White dot highlight on skulls
• Citadel Middenland Tufts

If you’re after tabletop ready models quickly, then I don’t think you can beat Contrast and one or two highlights as the best compromise between speed and acceptable quality. For projects with fewer models, like my Flesh Eaters space marines, then I do prefer traditional painting methods. But when you have to get a load of models done, especially highly textured models like Tyranids, then I just don’t have the hobby time these days to paint them in the traditional way.

That’s it for today, I hope you all found that interesting. Please check back soon for more miniatures from the Leviathan boxed set. As always, thanks very much for reading, and please don’t forget you can also follow my work on social media at Twitter, Mastodon and Instagram.